Wilson In-Building Wireless Amplifiers
Wilson carries two sizes of In-Building Wireless Amplifiers that will work with any cell phone or cellular data card. Both sizes of amplifier broadcast the improved signal into your home, office, building or warehouse through an inside antenna. They improve signal quality in rural or remote locations as well as shadowed environments such as steel, concrete and brick buildings. Determining which amplifier is right for your situation depends on how big of an area you are trying to cover and how strong the signal is outside the home or building.
!

In-Building Wireless Cellular 50 dB Amplifier (801105)

!
801105
Features
• Works on all generations of CDMA, TDMA, GSM and high-speed data technologies.
• Improves data communiciation rates needed for 3G
• Automatic gain control up to 50 dB
• 2 dB gain step 30-50 dB
• Automatic gain adjusting in the event of oscillation and/or overload.
• Power control logic ensures maximum output power is within cellular network standards
• Gain indicator lights
• Automatic shutdown on overload
• FCC and IC type accepted

In-Building Wireless Dual-Band SOHO Cellular/PCS Amplifier (801245)

!
801245
Features

• Available Spring 2007
• For 800 MHz Cellular and 1900 MHz PCS Bands.
• Works on all generations of CDMA, TDMA AND GSM.
• Automatic gain control to prevent oscillation.
• Automatic shutdown on overload.
• Maximum +30 dBm output power.
• Receiver sensitivity -110 dBm CDMA 1% FER.
• AC power supply included.
• FCC and IC type accepted.
• Patents Pending .

In-Building Wireless iDEN 50 dB Amplifier (804005)

!
804005
Features
• For iDEN frequencies
• Automatic gain control up to 50 dB
• Approximately 2 dB gain step 30-50 dB
• Power control logic ensures maximum output power is within cellular network standards
• Automatic shutdown on overload
• Gain indicator lights
• Oscillation detection and gain reduction with auto reset intervals
• AC power supply included
• FCC and IC type accepted

In-Building Wireless Cellular 60 dB Amplifier (801106)

!
801106

Features
• Works with all generations of CDMA, TDMA, GSM and high-speed data technologies
• Improves data communication rates needed for 3G technologies.
• Automatic gain control up to 60 dB
• 2 dB gain step 30-60 dB
• Power control logic ensures maximum output power is within cellular standards
• Gain indicator lights
• Automatic shutdown on overload
• FCC and IC type accepted